Garment Description and Features
Fully encapsulated Level A suit, extra wide three-layer faceshield (PVC 40 mil / Teflon® 5 mil / PVC 20 mil), attached internal Barrier® gloves, attached outer butyl gloves, expanded back (accommodates SCBA), front entry, gas-tight zipper closure, double storm flap over zipper, attached boots, outer boot flaps, knee wear pads, two exhaust valves, internal adjustment belt.
Fabric Description
Tychem® TK - a patented limited-use fabric consisting of multiple barrier films laminated to both sides of a tough substrate material. Tychem® TK provides one of the broadest ranges of chemical protection available, successfully tested against more than 260 chemicals.
Color: High-Visibility Lime Yellow
Specifications
- The suit shall be constructed from a patented limited-use fabric consisting of multiple barrier films laminated to both sides of a tough substrate material.
- The material shall demonstrate no measurable chemical permeation when tested against the ASTM F1001 Liquid Chemical Test Battery for a period of eight hours using the permeation test method ASTM F739.
- In addition to the ASTM F1001 test data, the manufacturer shall be able to provide chemical permeation data results against the base fabric for at least 260 chemicals for a period of at least four hours.
- All seams shall be stitched with polyester thread and covered with heat sealed film-type seam tape on the inside and outside of the seam. The tape used to cover the seams shall be of a similar composition as the films used in the base fabric and offer the same chemical resistance as the fabric.
- The suit shall be a front entry design with a gas tight zipper. Overlapping double storm flaps made of the base fabric shall cover the zipper.
- Suits are Made To Order! Orders cannot be cancelled once placed unless the suit is in stock!